Vertical tracking Isolators to reduce the lateral movement observed when hard mounted to tracking vehicles.
libra Spring Mounts
Our Spring Mounts can be used with Libra or Libra MINI and are strongly recommended if no crane is used for tracking.
The Black Arm
The Black arm is a 3-axis dampening system with a additional vibration mount for stabilizing roll and tilt errors as well as vertical motion and vibrations. The Black arm is a hardmount system, made for gimbals, that you want to mount on vehicles such as cars, ATVs, boats, snowmobiles etc.
The Mini Shock Absorber is for use with gyro stabilized heads to reduce high & low frequency vibrations and semi-hard impact shocks during high speed chases and rough crane moves. The best results are achieved when used with the Iso Dampener.
It connects to Mitchell plates and can mount either under or over slung as well as allowing the stabilized head to mount under or over slung. The front Mitchell plate swaps to a 150mm bowl if required and the rear Mitchell mount can be replaced by a dedicated GF-8 angle adjuster mount for direct connection to the GF-8 Crane.
9.8 kg / 21 lbs
- Payload range:
10 kg / 22 lbs to 65 kg / 143 lbs
- Lift range:
16 cm / 6.5″
- Temperature range:
-20° to +50° Celsius
-4° to +122° Fahrenheit
- Dimensions (L x W x H):
38 x 19 x 34 cm
14″ x 7″ x 13″
For full details see the Grip Factory Munich website.